Filter
Top Products
– 75 –
USER menu
<V BLANK>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
800 ADD LINE 0000 OFF
0001 YC422
0002 YC411
0003 Y1_B/W
0004 Y1_BPF
0005 C1
0006 Y2_B/W
0007 Y2_BPF
0008 C2
Sub screen
00 REC LINE 0000 10L
..
..
..
0012 22L
0013 263L
0014 273L
..
..
..
0025 284L
0026 525L
01 REC LINE2 0000 10L
..
..
..
0012 22L
0013 263L
0014 273L
..
..
..
0016 275L
..
..
..
0025 284L
0026 525L
The underline on the setting item denotes the initial setting.
This selects the mode in which the input signals are recorded
on additional lines.
0: No additional line recording.
1: For 1-line recording of the input signals in the 422 mode.
2: For 1-line recording of the input signals in the 411 mode.
3: For the 1-line recording of input signals in their original form
as the luminance signal.
4: For the 1-line recording of only the luminance signal after
the input signals have been separated into the luminance
and chrominance signals.
5: For the 1-line recording of only the chrominance signal
after the input signals have been separated into the lumi-
nance and chrominance signals.
6: For the 2-line recording of input signals in their original form
as the luminance signal.
7: For the 2-line recording of only the luminance signal after
the input signals have been separated into the luminance
and chrominance signals.
8: For the 2-line recording of only the chrominance signal
after the input signals have been separated into the lumi-
nance and chrominance signals.
<Notes>
• When a setting from 1 to 8 is selected and the STOP button
is pressed, operation moves to the sub screen and the
recording line or lines can be selected. Press the STOP
button again to return from the sub screen.
• Depending on the additional line recording mode, the
number of lines for recording teletext will differ.
For selecting the additional line where the signals are to be
recorded.
For selecting the additional line where the signals are to be
recorded.
<Note>
This menu item is not displayed when a setting from 1 to 5 has
been selected as the additional line mode.