Filter
Top Products
– 57 –
USER menu
<BASIC>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
000 P-ROLL 0000 0S
..
..
TIME . .
0005 5S
..
..
..
0015 15S
001 CHARA 0000 0
..
..
H-POS
..
0005 5
..
..
..
0011 11
002 CHARA 0000 0
..
..
V-POS
..
0018 18
..
..
..
0022 22
003 DISPLAY 0000 TIME
SEL
0001 T&STA
0002 T&S&M
0003 T&RT
0004 T&YMD
0005 T&MDY
0006 T&DMY
The underline on the setting item denotes the initial setting.
This sets the preroll time which can be set from 0 to 15
seconds in 1-second increments.
<Note>
When the unit is set to automatic editing [PREVIEW, AUTO
EDIT], the unit will not operate if the preroll time is set to 0
seconds.
This sets the position of the characters on the horizontal plane
for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set. How-
ever, when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according to
the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3 connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set. How-
ever, when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according to
the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This is used to select what is to appear as the time code or
other superimposed display at the VIDEO OUT 3 connector.
0: Time only
1: Time and operating status
2: Time, operating status and mode
3: Time and recording time
4: Time and recording date (year/month/day)
5: Time and recording date (month/day/year)
6: Time and recording date (day/month/year)
<Notes>
• “DVCPRO MODE,” “DV MODE” or “DVCAM MODE” is
displayed as the mode when a DVCPRO, DV or DVCAM
format tape is used, respectively.
• When setting 2 (T&S&M) is used, an error message will
appear when a warning or error has occurred.
• The recording time and recording date are displayed only
when a DV or DVCAM format tape is played back. The
operating status is displayed when a DVCPRO format tape
is played back.