Filter
Top Products
25
How to load the user defaults
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
1
Press the RESET button.
The unit is set to the default setting mode, and
the default setting screen appears on the video
monitor.
2
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The unit is set to the LOAD mode, and the load
screen appears on the video monitor.
3
SELECT MODE
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
SET–UP MENU <LOAD>
NO
FACTORY (ALL)
FACTORY (NOT SYSTEM)
USER (ALL)
USER (NOT SYSTEM)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to USER (ALL), and
press the SET button.
O
If this operation is performed with the cursor
moved to USER (NOT SYSTEM) instead,
operation will be performed on the basis of all
the user settings saved in the memory except
for the SYSTEM menu settings.
O
If this operation is performed with the cursor
moved to NO, no change is made to the user
settings saved in the memory, and operation is
returned to the menu screen.
4
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu settings.
5
How to protect the menus
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
1
Opening the setup menu can be prevented even when
the LOCAL/MENU/REMOTE switch on the front panel
is set to the MENU position by setting the unit to the
menu protect mode.
Press the RESET button.
The unit is set to the default setting mode, and
the default setting screen appears on the video
monitor.
2
3
SELECT MODE
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
MENU PROTECT OK?
NO
YES
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the YES
position, and press the SET button.
The menu screen is now displayed.
4
Setup (Initial Settings)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the PROTECT
position, and press the SET button.
The unit is set to the menu protect setting mode,
and a screen for checking whether to protect the
menus appears on the video monitor.