Filter
Top Products
37
711 PB AUDIO SEL
0000
0001
TR1/2
TR3/4
For setting the audio tracks to be played back. (This function works in the
50 Mbps mode.)
0: The sound recorded on tracks 1 and 2 is played back.
1: The sound recorded on tracks 3 and 4 is played back.
712 SDI IN SEL
0000
0001
CH1/2
CH3/4
For setting the audio SDI input channels for recording. (This function works
when the optional SDI input/output board has been installed. When it has
not been installed, “N/A” is displayed, and the function does not work.)
0: The SDI input CH1 and CH2 sound is recorded.
1: The SDI input CH3 and CH4 sound is recorded.
713 AUD REC IN
0000
0001
CUT
FADE
For setting the audio processing method at the point when digital audio
recording is commenced.
0: Cut processing
1: V fade processing
714 EMBEDDED AUD
0000
0001
OFF
ON
For setting sound multiplexing.
(This function works when the optional SDI input/output board has been
installed. When it has not been installed, “N/A” is displayed, and the
function does not work.)
0: The sound is not multiplexed.
1: The sound is multiplexed.
AUDIO menu
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining indicates the factory setting.
Setup Menus
715 AUDIO IN SEL
0000
0001
0002
SW
ANALOG
SDI
This sets the audio signal input.
(This function works when the optional SDI input/output board has been
installed. When it has not been installed, “N/A” is displayed, and the
function does not work.)
0: Interlocks with the settings of the INPUT SELECT button.
1: Fixes the analog signal input setting.
2: Fixes the SDI signal input setting.