Panasonic AJ-D455P VCR User Manual


 
20
Setup menus
SYSTEM menu
<SYSTEM>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
00 SYS SC 0000 0
COAR. 0001 90
0002 180
0003 270
01 SYS SC 0000 –127
..
..
FINE
..
0127 0
..
..
..
0255 128
02 SYS H 0000 –127
..
..
..
0127 0
..
..
..
0255 128
03 ENCODER 0000 OFF
SEL 0001 ON
05 SCH 0000 0
COARSE 0001 90
0002 180
0003 270
06 SCH 0000 –32
..
..
FINE
..
0032 0
..
..
..
0064 32
10 AV PHASE 0000 –128
..
..
..
0128 0
..
..
..
0255 127
15 VIDEO 0000 –127
..
..
LEVEL
..
0127 0
..
..
..
0255 128
16 SET UP 0000 –127
..
..
LEVEL
..
0127 0
..
..
..
0255 128
17 HUE 0000 –128
..
..
..
0128 0
..
..
..
0255 127
The underline on the setting item denotes the initial setting.
System phase rough adjustment: 90° units
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase fine adjustment: Variable range ±45° or more
–: advanced
+: delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase adjustment: SC period increments, ±15 µs
variable range
–: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
For selecting whether the ENCODER REMOTE connector is
to function or not.
0: Does not functions.
1: Functions.
For coarsely adjusting the SCH phase: 90-degree increments
(The SC phase is varied but the H phase remains unchanged.)
For finely adjusting the SCH phase: Variable range from –45°
to +45°
(The SC phase is varied but the H phase remains unchanged.)
This adjusts the audio output phase with respect to the video
output: 20.8 µs steps
–: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the
video output.
For setting the video level.
The maximum amount by which the level can be varied is
from –3 to +3 dB.
For setting the setup amount.
The maximum amount by which the setup can be varied is
14 IRE.
For setting the hue.
The maximum amount by which the hue can be varied is from
–30° to +30°.