Filter
Top Products
44
Video head cleaning
This unit is equipped with an auto head cleaning function which automatically reduces the
amount of dirt on the video heads. However, in order to maximize the unit’s reliability, it is
recommended that the video heads be cleaned as and when appropriate.
For further details on how to actually clean the heads, consult with one of our service
companies or with your dealer.
Condensation
Condensation occurs due to the same principle involved when droplets of water form on a
window pane of a heated room. It occurs when the unit or tape is moved between places
where the temperature or humidity varies greatly or when, for instance:
• It is moved to a very humid place full of steam or a room immediately after it has been
heated up.
• It is suddenly moved from a cold location to a hot or humid location.
When moving the unit to locations such as these, leave it standing for about 10 minutes
rather than switching on the power immediately.
If condensation has formed on or in the unit, the “E-20” code flashes in the counter display
and the cassette tape is automatically ejected.
Keep the power supplied and simply wait until the “E-20” code goes off.
<Note>
Do not use alcohol, benzine, paint thinners or any other solvents. They cause discoloration of
the unit’s external parts surfaces and mar the paint finish.
Installing the mechanism dust protector
Mechanism dust protector
Protrusion
Protrusion
w Insert the protrusion
under the top-front
metal plate.
q Insert the protrusion
alongside the metal
plate inside the
mechanism.
■ Do not insert fingers or any objects into the video
casette holder.
■ Avoid operating or leaving the unit near strong
magnetic fields. Be especially careful of large audio
speakers.
■ Avoid operating or storing the unit in an excessively hot,
cold, or damp environment as this may result in damage
both to the recorder and to the tape.
■ Do not spray any cleaner or wax directly on the unit.
■ If the unit is not going to be used for a length of time,
protect it from dirt and dust.
■ Do not leave a cassette in the recorder when not in use.
■ Do not block the ventilation slots of the unit.
■ Use this unit horizontally and do not place anything on
the top panel.
■ Cassette tape can be used only for one-side, one
direction recording. Two-way or two-track recordings
cannot be made.
■ Cassette tape can be used for either Color or Black &
White recording.
■ Do not attempt to disassemble the recorder.
There are no user serviceable parts inside.
■ If any liquid spills inside the recorder, have the recorder
examined for possible damage.
■ Refer any needed servicing to authorized service
personnel.
CAUTION:
These servicing instructions are for use
by qualified service personnel only. To
reduce the risk of electric shock do not
perform any servicing other than that
contained in the operating instructions
unless you are qualified to do so.