Filter
Top Products
25
USER menu
<OPERATION> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
113 MEMORY 0000 OFF
STOP 0001 ON
114 REC 0000 OFF
INHIBIT 0001 ON
120 REC INH 0000 LIGHT
LAMP 0001 FLASH
121 EJECT SW 0000 REC
INH 0001 OFF
The underline on the setting item denotes the initial setting.
This selects whether the VTR is to stop automatically when
the counter value reaches “0” during a fast forwarding or
rewinding operation in the CTL mode.
0: The VTR does not stop.
1: The VTR stops automatically.
<Notes>
1. The stop mode concerned is either the stop or the still-
picture mode depending on the setup menu No. 313
(AFTER CUE-UP) setting.
2. When both the AUTO REW function and MEMORY function
have been selected at the same time, the AUTO REW
function takes precedence.
This selects whether to allow (enable) or prohibit (disable) the
recording of signals on the cassette tape.
0: Signals can be recorded on the cassette tape when the
cassette’s accidental erasure prevention mechanism is set
to the recording enable position.
1: Recording on the cassette tape is prohibited. In this case,
the REC INH lamp on the front panel lights.
For selecting whether the REC INHIBIT lamp is to flash or light
when the cassette has been set to the accidental erasure
prevention status.
0: The lamp lights.
1: The lamp flashes.
<Note>
When ON has been selected as the setup menu item No. 114
(REC INHIBIT) setting, the REC INHIBIT lamp will light all the
time regardless of what has been selected as this item’s
setting.
For selecting whether to enable or disable the operation of the
front panel’s EJECT button.
0: The button’s operation is disabled in the recording mode.
1: The button’s operation is enabled in all modes.