Filter
Top Products
27
USER menu
<EDIT>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
303 STD/ 0000 AUTO
NON-STD 0001 STD
0002 N-STD
304 SERVO 0000 AUTO
REF 0001 EXT
305 EDIT 0000 N-DEF
RPLCE1
0001 CH1
0002 CH2
0003 CH1+2
306 EDIT 0000 N-DEF
RPLCE2 0001 CH1
0002 CH2
0003 CH1+2
307 EDIT 0000 N-DEF
RPLCEC 0001 CH1
0002 CH2
0003 CH1+2
309 AUD EDIT 0000 CUT
IN
0001 FADE
310 AUD EDIT 0000 CUT
OUT
0001 FADE
The underline on the setting item denotes the initial setting.
This selects STD or NON-STD in accordance with the com-
posite input signal.
0: Standard/non-standard signals are automatically identified
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
This selects the video signal processing.
0: Servo is synchronized with the input signal during recording
and editing, or with the REF signal during playback.
1: Servo is synchronized at all times with the REF signal.
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This selects the connection method for the digital audio edit IN
point.
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
OUT point.
0: Cut processing
1: V Fade processing