Filter
Top Products
Before Use
13
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes in
all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Preparation
≥Turn on the TV and select the appropriate video input to suit the
connections to this unit.
≥If you connect the unit through a cable TV box or satellite receiver
(l 11), tune to your local PBS for “Auto Clock Setting” to work.
If there is no local PBS, set the clock manually (l 46, “Manual
Clock Setting”).
≥Press [DVD].
[1] Press [Í, DVD/VHS POWER].
[2] Use [3, 4] to select the language and press
[ENTER].
[3] Press [ENTER] to start Plug-in Auto Tuning.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich mean
time (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time) l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
[4] Press [ENTER].
∫If the clock is an hour slower or faster than the actual
time
Select “j1” or “i1” in “Time Zone Adjust” in the SETUP menu
(l 46).
∫If the unit couldn’t set the clock automatically
Set the time manually (l 46, “Manual Clock Setting”).
∫To start Plug-in Auto Tuning again (after relocation, for
example)
When the unit is on and stopped
[1] Press and hold [CH, W] and [CH, X] on DVD of the main unit for
about 5 seconds.
The unit turns off.
[2] Press [Í, DVD/VHS POWER] to turn the unit on.
STEP 2 Plug-in Auto Tuning
Band Channel
TV Mode
(Airwaves)
VHF 2–13
UHF 14–69
CATV Mode
(Cable)
VHF 2–13
CATV LOW BAND 95–99
CATV MID/SUPER BAND 14–36
CATV HYPER BAND 37–65
ULTRA BAND
66–94
100–125
SPECIAL CATV CHANNEL 1
3, 4, 2, 1
ENTER
Í
DVD
FUNCTIONS
OUTPUT
POWER
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
OUTPUT
PLAY
PROG/CHECK
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
STATUSDISPLAY
SUB MENU
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione la Lengua
Sélection de Langue
Antenna system, channel caption, and guide channel
settings for VCR Plusi system all revert to the default
values when you perform the procedure below. Timer
recording settings are also cleared.
Auto Channel Setting
CH.
Auto Channel Setting
Proceeding . . .
1 1 1
1
Auto Clock Setting
Auto Clock Setting is complete.
4/4/2004 12:15 AM
DST............. ON
TIME ZONE.... CST
PP-Sample.book 13 ページ ２００４年３月８日 月曜日 午後６時３分