Timer Recording
53
If, at the beginning of a timer program, there is not enough tape
remaining to complete the recording, the SP/EP function will
automatically run the tape at EP speed. This ensures that the entire
program will be recorded. If EP mode is not enough to stretch the
remaining tape to fit the whole program you will not be able to record
all of the TV program.
≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (l 56)
≥Some tapes may not work correctly.
≥If the tape speed changes from SP to EP during a timer recording,
some brief picture distortion occurs at that point.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Preparation
≥Press [VHS].
[1] Press [PROG/CHECK].
[2] Press [3, 4] to select the program.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
For your reference
≥Programs that failed to record are not deleted from the list
immediately, but are deleted from the list automatically at 4 a.m.
two days later.
Timer recording for TV programs cannot be executed on both DVD
and VHS at the same time.
Make sure the timer recording start times do not overlap on both
DVD (l 29) and VHS (l left) timer-programming screens.
When the timer recording settings overlap:
≥When the start time of both timer recordings is the same, the timer
recording of DVD has priority.
≥When tuner channels are specified in timer recordings on both VHS
and DVD, only one timer recording can be started.
≥When the interval between the first timer recording and the second
timer recording on DVD is 1 minute or less as shown below, the
second timer recording on DVD has priority over the timer
recording on VHS even if its start time is later than the timer
recording on VHS.
Auto SP/EP mode
Check, change or delete programs
Timer programming
Video tape
1st program
(30 min.)
30 min. at SP
2nd program (60 min.)
15 min.
at SP
45min.
at EP
CH DATE ON OFF
6 SA 6:00 PM 7:00 PM S P
25 13WE 10:12 AM 10:30 AM S P
NEW TIMER PROGRAM
Cautions for using timer recording on
DVD and VHS
1 minute
4 CH
10 CH
2 CH
VHS
DVD
VHS
PP-Sample.book 53 ページ 2004年3月8日 月曜日 午後6時3分