Filter
Top Products
28
Timer Recording
[RAM] [DVD-R]
You can enter up to 16 programs up to a month in advance.
Preparation
≥Release protection (disc l 30, cartridge l 18). [RAM]
≥Insert a disc (l 20) and confirm there is sufficient empty space for
recording on it (l 47).
≥Press [DVD].
Entering the PlusCode numbers is an easy way of timer recording.
You can find these codes in TV listings in newspapers and
magazines.
≥When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the timer recording
manually (l right).
[1] Press [VCR Plus_].
[2] Press the numeric buttons to enter the
PlusCode number.
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
Confirm the program
and correct it if
necessary using [3,
4, 2, 1] (l right,
step 3).
≥When “XP” is
displayed in the unit’s display, the recording mode
automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set timer recording using “XP” mode.
≥“Invalid Entry” is displayed when you enter the wrong PlusCode
number. Reenter the PlusCode number.
≥To enter the title of the program
Press [2, 1] to select “Enter Name” and press [ENTER]
(l 32).
[4] If the program is
correct
Press [ENTER].
≥“ ” lights on the
unit’s display.
≥Repeat steps 1–4 to
program other
recordings.
[5] Press [RETURN].
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before timer
recording starts.
[1] Press [PROG/CHECK].
≥Make sure “New Timer Program” is selected.
[2] Press [ENTER].
[3] Use [1] to move and change the items with
[3, 4].
≥You may use the numeric buttons to enter “CHANNEL”,
“DATE”, “ON” and “OFF”.
≥CHANNEL (Program Position/TV Station Name)
≥DATE
You can also make a daily or weekly program.
Each daily or weekly program is counted as one program.
≥ON (start time)/OFF (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
≥MODE (Recording mode)
You can also press [REC MODE] to change the recording
mode.
XP,.SP,.LP,.EP,.FR,.XP... (l 27)
≥Enter Name
Press [2, 1] to select “Enter Name” and press [ENTER]
(l 32).
[4] Press [ENTER]
when you have
finished making
changes.
≥“ ” lights on the
unit’s display.
≥To continue
programming:
Select “New Timer Program” and repeat steps 2–4.
[5] Press [RETURN].
∫Caution for Timer recording
Timer recording automatically starts at the set time.
≥Timer recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot
be outputted to the TV.
Using VCR Plus_ system
DVD
RETURN
VCR Plusi
PROG/CHECK
REC MODE
∫
3, 4, 2, 1
ENTER
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
JET REW
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
Numeric
Buttons
VCR Plus+
Remaining Recording Time
4:00 LP
12:53 PM7/13 TUE
MODE
OFFON
CHANNEL
DATE
TIMER
RECORDING
Remaining Recording Time
4:00 LP
39 7/ 6 TUE 21:00 PM20:00 PM SP
Enter Name
12:53 PM7/13 TUE
Manual programming
TIMER
RECORDING
Remaining Recording Time
4:00 LP
SP
OK
21:00 PM20:00 PM39 7/ 6 TUE01
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
Check to make sure “OK” is displayed.
TIMER
RECORDING
Remaining Recording Time
4:00 LP
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
7/ 6 TUE01 SP
OK
21:00 PM20:00 PM39
Highlighted line
is ready for
programming.
MODE
OFFON
CHANNEL
DATE
TIMER
RECORDING
Remaining Recording Time
4:00 LP
Enter Name
12:53 PM7/13 TUE
: :
TIMER
RECORDING
Remaining Recording Time
4:00 LP
MODE CHECK
OFFONNo
CHANNEL
DATE
New Timer Program
12:57 PM7/13 TUE
7/ 6 TUE01 SP
OK
21:00 PM20:00 PM39
7/24 SAT02 SP
OK
3:00 PM 2:30 PM64 ABC
Check to make sure “OK” is displayed.
DVD
PP-Sample.book 28 ページ ２００４年３月８日 月曜日 午後６時３分