Filter
Top Products
Playback
23
[RAM] [DVD-R]
Skips the specified time.
Displays the TV image being received as a picture-in-picture.
[1] During play
Press [TIME SLIP]. (Press again to cancel.)
≥You will hear the playback audio.
≥The blue background does not appear on the receiving screen
even if you select “On” from “Blue Background” in the SETUP
menu (l 45).
[2] Press [3, 4] to enter the time and press
[ENTER].
≥The time indicator will go off after about 5 seconds, but will turn
on again when you set the indicator.
≥Play skips the amount of time you entered.
≥Press to alter in 1-minute units. Press and hold to alter in
10-minute units.
(1)Play images
(2)Current receiving images
≥You can change the channel being received by pressing
[CH, W, X].
≥You cannot change the channel being received while
recording.
∫To show the play images in full
Press [TIME SLIP].
[RAM] [DVD-R]
You can erase titles while playing.
≥A title cannot be restored once it is erased. Make certain before
proceeding.
[1] During play
Press
[DVD ERASE].
[2] Select “Erase”
with [2] and
press [ENTER].
For your reference
≥It is not possible to erase a title when you are carrying out
simultaneous recording and play (l 25). [RAM]
≥It is not possible to erase a title that is in the process of being
recorded.
≥The available recording time on DVD-R does not increase when
you erase titles.
[RAM]
[1] During play
Press [CHAPTER].
≥Press [:, SKIP] or [9, SKIP] to skip to the start of a
chapter.
≥You cannot activate this function when recording and playing at
the same time.
[RAM] [DVD-A] [DVD-V] [VCD]
You can change the audio being played.
Press [AUDIO] to select the audio type.
[RAM] [VCD] (l 47)
LR#L#R
^--------------}
≥When playing an SAP
broadcast recorded in
DVD-RAM:
MAIN ()SAP
[DVD-A] [DVD-V] (l 40)
You can change the audio channel number by pressing [AUDIO].
This allows you to change items like the sound track language.
e.g.: [DVD-V] English is the selected language.
Note
If you cannot change the audio type when you have used only an
optical digital cable for connection, set “Dolby Digital” to “PCM”
(l 44). Alternatively, you may connect to an amplifier with an Audio/
Video cable and change the input on the amplifier to suit the
connection.
Displaying the TV image as a picture-in-
picture/
Selecting an amount of time to skip —
Time Slip
Erasing a title that is being played
0 min
–5 min
(1)
(2)
PLAY
CH8
PLAY
CH8
Erase
Erase Cancel
0 : 58(SP)
Corresponding play list chapters will be erased.
Time remaining after erase
Create chapters
Changing audio during play
PLAY
L R
DVD-RAM
e.g.: [RAM]
“L R” is selected
Sound track
1 ENG Î Digital 3/2.1ch
DVD
PP-Sample.book 23 ページ ２００４年３月８日 月曜日 午後６時３分