Playback
50
It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
It is not possible to record in the S-VHS system with this unit.
During play or while stopped
Keep pressing [1, PLAY] for 5 or more
seconds.
≥The “RP” indication appears on the display.
≥At the end of the program, the tape rewinds to the
beginning of the program and plays it again (it only
works if there is at least 5 seconds blank at the end of the
program). This repeats until you cancel it.
∫To cancel
Press [∫, STOP].
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.
Adjust the vertical to stop the picture from jiggling while paused.
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
∫To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
∫To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note:
≥This may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical with [CH, W, X] on the
unit.
Preparation
≥Press [VHS].
S-VHS Quasi Playback (SQPB)
Repeat Playback
REC MODE
VHS
STATUS
TV/VIDEO
1
;
∫
CH, W, X
TRACKING/
V-LOCK, r, s
µ
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
POWER
TIME SLIP
CHAPTER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
DVD ERASE
VCR Plus+
OUTPUT
Numeric
Buttons
Adjusting the playback picture
∫ Manual tracking
∫ Vertical locking adjustment
VHS
PP-Sample.book 50 ページ 2004年3月8日 月曜日 午後6時3分