Filter
Top Products
Before Use
17
You do not have to change the setting when connected to a 4:3
standard aspect TV that is not compatible with progressive output.
(l 63)
Preparation
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “TV Screen” with [3, 4] and press
[2, 1].
[4] Select “TV Type” with [3, 4] and press
[ENTER].
≥Aspect 4:3/Aspect 16:9:
≥480P/480I:
Select “480P” if the TV is compatible with progressive output.
[5] Use [3, 4] to select the item and press
[ENTER].
You can configure the remote control TV operation buttons to turn
the TV on/off, change the TV input mode, select the TV channel and
change the TV volume.
Point the remote control at the TV
While pressing [Í POWER TV], enter the code
using the numeric buttons.
e.g., 01: press [0] ) [1].
Manufacturer and Code No.
Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
Change the remote control code on the main unit and on the remote
control (the two must match) if you place other Panasonic products
close together.
Use “1”, the factory set code, under normal circumstances.
Preparation
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS]. (l 47)
[2] Select “SETUP” with [3, 4, 2, 1] and press
[ENTER].
[3] Select “Set Up” with [3, 4] and press [2, 1].
[4] Select “Remote Control Code” with [3, 4] and
press [ENTER].
[5] Use [3, 4] to select the code (1, 2, or 3) and
press [ENTER].
The code on the unit has been set.
[6] While pressing [ENTER], press and hold for
about 2 seconds the numeric button ([1], [2] or
[3]) corresponding to the code you selected in
step 5.
The code on the remote control has been set.
[7] Press [ENTER].
∫When the following indicator appears on the unit’s
display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
(l step 6).
STEP 4 Set up to match your TV and remote control
∫ Selecting TV type
∫ TV operation
Panasonic
National
QUASAR
01, 02
PHILIPS (RC-5) 03
RCA 05
SAMSUNG 14, 18, 19
FISHER 10 SANYO 10
GE 05 SHARP 06, 07
GOLDSTAR 15, 16, 17 SONY 08
HITACHI 12 SYLVANIA 03
JVC 11 THOMSON 05
LG 15, 16, 17 TOSHIBA 09
MAGNAVOX 03 ZENITH 04
MITSUBISHI 13
Aspect 4:3 & 480I
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
Aspect 4:3 & 480P
Aspect 16:9 & 480I
Aspect 16:9 & 480P
TV Type
SETUP
4:3
16:9
4:3 standard aspect TV 16:9 widescreen TV
∫ When other Panasonic products respond
to this remote control
∫To return to the previous screen
Press [RETURN].
∫When you are finished
Press [RETURN].
PP-Sample.book 17 ページ ２００４年３月８日 月曜日 午後６時３分