Panasonic DMR-E75V DVD Recorder User Manual


 
Advanced Operations
60
You can transfer (dubbing) programs recorded on a disc° onto a tape
with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically
dubbed onto the tapes.
° Available discs for transfer (dubbing) onto tape are DVD-RAM and
non-finalized DVD-R. Most DVD videos cannot be dubbed
because they are copy-guarded.
Preparation
Select the unit viewing channel (or the AV input) on the TV.
DVD
Insert the disc containing the program to be copied (l 20).
VHS
Insert a video cassette with an intact erasure prevention tab.
(l 48)
Confirm that the remaining tape time is sufficient for recording.
(l 57)
Select the recording mode.
[1] While both DVD/VHS are stopped,
Press and hold [VHS , DUBBING] for 3 seconds
or more.
On the main unit, press [VHS ].
Check if transfer (dubbing) starts properly.
The [DUBBING] indicator on the main unit lights.
Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
To stop transfer (dubbing) halfway through
Press [, STOP].
When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
When transfer (dubbing) is started, the following
operations also start automatically:
“Status Messages” on Display ) “Off” (l 45)
Recording channel indication on VHS ) “DC”
Output to TV ) VHS output
Audio output when playing back DVD ) Stereo (L R) [RAM]
Only the following operations are allowed while
transfer (dubbing):
Stopping transfer (dubbing) by pressing [, STOP].
Note:
While One Touch Transfer (Dubbing) is activated, timer recording
cannot be started.
When “DVD/VHS Output” is set to “Manual” (l 43), or when DVD
output is selected in starting transfer (dubbing), the output is
switched to VHS automatically at the time when transfer (dubbing)
is started.
-
When the transfer (dubbing) is already started, you cannot switch
the output manually.
When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
If you start transfer (dubbing) when “PB” is blinking on the unit’s
display, the DVD is dubbed from the beginning of the title which
you stopped.
Transfer (Dubbing) from DVD
PROG/CHECK
DVD RECVHS REC
REC MODE
ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUSDISPLAY
DVD ERASE
VHS
DVD
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
POWER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
CH, W, X
µ, VHS REC
VHS
:, 9
OPEN/CLOSE
TIME SLIP
REC
CH
/k1.3
DUBBING
VHS
DVD
DUBBING indicator
One Touch Transfer (Dubbing) (DVD l VHS)
About Recording VISS (l 55)
In One-Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired
titles with [: ] or [ 9].
VHSDVD
PP-Sample.book 60 ページ 2004年3月8日 月曜日 午後6時3分