Filter
Top Products
13
RQTV0141
(1) Cassette eject button (<, EJECT). . . . . . . . . . . . . . . . . l 24
(2) Disc tray open/close button (<, OPEN/CLOSE). . . . . . l 24
(3) Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 32, 37
(4) Play/t1.3 button (1). . . . . . . . . . . . . . . . . . . . . . . . . l 32, 37
(5) Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . l 25, 57
(6) DVD/VHS POWER on/off button (Í/I, POWER). . . . . . . l 18
≥To switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small
amount of power.
(7) IN2 input terminals (IN2). . . . . . . . . . . . . . . . . . . . . . . . . l 57
(8) DVD-SEARCH, VHS-REW/FF buttons (V/6, 5/W)
(9) Channel up/down buttons (CH, X, W) . . . . . . . . . . . . . . l 38
(10)DVD/VHS/SD drive indicator
≥Lights when the DVD, VHS or SD drive is selected.
(11)DRIVE SELECT button
≥Drive changes each time you press [DRIVE SELECT].
(12)SD card slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 11
(13)Connector for a digital video (DV) camcorder. . . . . . . . l 57
(14)One Touch Transfer (copying) operation button
≥From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 50
≥From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 52
Common to DVD/VHS/SD
[A] Recording mode indicator
DVD:
XP, SP, LP, EP: (l 26)
XP SP LP EP (all on): FR mode (l 29)
VHS:
SP, LP°, EP, VP: (l 26)
° Playback only
[B] TV indicator
≥The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV].
(l 23)
[C] Main display
≥Current time
≥Disc recording and play counter
≥VHS recording and play counter
≥Transfer (Copying) messages
≥Miscellaneous messages, etc.
VHS
(1) Scheduled recording indicator ( ) (l 30)
On:
When a scheduled recording program is registered and
recordable tape is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no tape, etc).
(2) Tape indicator
(3) Tape operation status
DVD
(1) Scheduled recording indicator ( ) (l 30)
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc, etc).
(2) Disc operation status
(3) Disc indicator
SD
(1) SD Card indicator
Main unit
CH
CH
POWER
DRIVE
SELECT
REC
OPEN/CLOSE
EJECT
S VIDEO
IN 2
VIDEO
/MONO
AUDIO
R
L
COPYING
COPYING
(2)
(1)
(5)
(3)
(4)
(14)
(6)
(7)
(8)
(9)
(11)
(13)
(10)
(12)
The unit’s display
(2)
(3)
(2)
(3) (1)
(1)(1)
[A]
[B]
[C]
Control reference guide
M6VP&PC.book 13 ページ ２００６年２月６日 月曜日 午後３時２９分