Filter
Top Products
73
RQTV0141
Still pictures Page
VHS Picture Page
VHS Sound Page
VHS Play Page
VHS Recording, scheduled recording Page
Cannot display Direct
Navigator screen.
≥This screen cannot be displayed during recording or copy. –
Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message
sometimes appears on the screen even when protection has been set.)
60
The contents of the card
cannot be read.
≥The card format is not compatible with the unit. (The contents on the card may be damaged.)
Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.
≥The card contains a folder structure and/or file extensions that are not compatible with this unit.
≥Turn off and then turn on the unit again.
≥SD memory cards from 8 MB to 2 GB can be used with this unit.
8, 36,
60
8
–
–
Copying, deleting and setting
protection takes a long time.
≥When there are a lot of folders and files, it may sometimes take a few hours.
≥When repeating copying or deleting, it may sometimes take a long time. Format the disc or card.
–
60
Scheduled recording began
in the middle of editing a still
picture.
≥If it comes to the time scheduled for recording, the recording may start even though you are editing. –
OSD messages do not
appear.
≥Go to Setup and select “Automatic” in “Status Messages”.
Press [STATUS] to show the on-screen messages constantly.
38, 65
The blue back appears
during play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back to
appear. Consult your dealer.
–
–
Cannot hear the desired
audio type.
≥Press [AUDIO] to select the audio. 33
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
38
–
Cannot play. ≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played. –
The playback screen flickers. ≥The video head is dirty.
≥The tape is too old or damaged.
–
–
“1” flashes when I try to
start recording.
Cannot record.
≥A video cassette is not inserted. Insert a video cassette with an accidental erasure prevention tab.
≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.
24
11
Cannot record TV program. ≥The desired channel is not selected. Select the desired TV program. –
Troubleshooting guide
M6VP&PC.book 73 ページ ２００６年２月６日 月曜日 午後３時２９分