Filter
Top Products
19
RQTV0141
∫If the clock is an hour slower or faster than the actual
time
Select “j1” or “i1” in “Adjust Time Zone” in the Setup menu (l 63).
Signal source, RF output channel, channel caption revert to the
default values when you perform the procedure below.
Scheduled recording settings are also cleared.
When the unit is on and stopped
[1] Press and hold [CH, W] and [CH, X] on the main
unit for about 5 seconds.
The unit turns off.
[2] Press [Í, DVD/VHS POWER] to turn the unit on.
Plug-in Auto Tuning starts.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [
3, 4] and press
[ENTER].
[3] Select “Setup” with [
3, 4] and press [ENTER].
[4] Select “Channel” with [
3, 4] and press [2, 1].
[5] Select “Signal Source (RF IN)” with [
3, 4] and
press [ENTER].
[6] Select “Antenna” or “Cable TV” with [
3, 4] and
press [ENTER].
[7] Select “Set Channels Automatically” with [
3, 4]
and press [ENTER].
[8] Press [ENTER].
≥Auto Channel Setting starts. This takes a few minutes.
[9] Press [ENTER].
∫To cancel in the middle
Press [RETURN].
∫To exit the screen
Press [RETURN].
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[1] Press the numeric buttons to select a channel.
Antenna Mode (Airwaves)
e.g., “5”: [0] )[5]
“15”: [1] )[5]
CableTV Mode (Cable)
e.g., “5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
≥You can also use [CH, X, W] to select a channel.
[2] Press [CH, ADD/DLT].
e.g., The channel is deleted.
“Clock Settings” made here are applied to VHS as well.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [
3, 4] and press
[ENTER].
[3] Select “Setup” with [
3, 4] and press [ENTER].
[4] Select “Setup” with [
3, 4] and press [2, 1].
[5] Select “Clock Settings” with [
3, 4] and press
[ENTER].
[6] Select “Set Clock Manually” with [
3, 4] and
press [ENTER].
[7] Use [
2, 1] to select the item you want to
change, and press [
3, 4] to change the setting.
≥DST (Daylight Saving Time): On or Off
If you select “On”, the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on the
last Sunday in October.
≥Time Zone (l 22)
[8] Press [ENTER].
≥The clock starts.
≥When you change the time zone, the recording times for titles
recorded before the time zone adjustment also change to
correspond to the new time zone.
∫To return to the previous screen
Press [RETURN].
∫ Restart Plug-in Auto Tuning
(after relocation, for example)
∫ Restart Set Channels Automatically
No Disc
FUNCTIONS No Disc
Program
Copy
Other Functions
ENTER
RETURN
No Disc
FUNCTIONS No Disc
Program
Copy
Other Functions
Setup
ENTER
RETURN
Manual Channel Captions
Signal Source (RF IN)
Channel
Setup
Disc
Video
Audio
Display
Set Channels Automatically
Channel Captions
Preset Channel Captions
Antenna
Setup
Antenna
Channel
Setup
Disc
Cable TV
Signal Source (RF IN)
Setup
∫ Adding and deleting channels
∫ Set Clock Manually
The unit’s display
Channel 15 Deleted
Off Timer
Channel
Setup
Disc
Video
Audio
Display
TV Screen
Remote Control Code
Clock Settings
6 Hours
Set Code 1
Quick Start
Restore Default Settings
On
Setup
VHS
Set Clock Manually
/ :
/
SAT PM
Month Day Year
Hour Minute
1
1
12 00
2000
DST Time Zone
Off
EST
ENTER
STEP 2 Plug-in Auto Tuning
M6VP&PC.book 19 ページ ２００６年２月６日 月曜日 午後３時２９分