Filter
Top Products
9
RQTV0141
∫When recording an SAP program to DVD-R, etc.
Select the audio to record before recording or transferring (copying).
Some television programs are broadcast in SAP (Secondary Audio Program). You have to select the audio recording type before recording or
transferring (copying) them to DVD-R, etc.
∫Playing the disc on other DVD players
The disc must be finalized after recording or transferring (Copying) (l 61).
It is necessary to finalize DVD-R, etc. on this unit after recording or transferring (copying) titles to them. You can then play them as a
commercially sold DVD-Video. However the discs become play-only and you can no longer record or transfer (copy).°
° You can record and transfer (copy) again if you format DVD-RW.
∫Recording to a DVD-R DL and +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
It is not possible to record continuously from the first layer to the second layer. Recording stops when space on the first layer becomes full.
You must close the first layer to start recording on the second layer. Closing makes the first layer unavailable for recording (editing is still
available). You cannot cancel closing. Make certain before proceeding.
Using DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW on this unit
Restrictions with DVD-R, etc.°
≥16:9 aspect programs are recorded in 4:3 aspect.
≥Either Main or SAP can be recorded for MTS broadcasts.
≥Playing the disc on other DVD players is not possible before finalizing.
° DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW are collectively referred to as “DVD-R, etc.” on this page.
Therefore, follow the steps below when you use DVD-R, etc.