Filter
Top Products
12
RQT6570
Setting up
STEP 3 Plug-in Auto Tuning
After plugging the unit into your household AC outlet and pressing
[Í, DVD POWER] to turn the unit on for the first time, the unit auto-
matically tunes in all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (air or
cable) and puts them into channels as follows.
≥TV Mode
≥CATV Mode
Preparation
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
1 Press [Í, DVD POWER] to turn the
unit on.
2 Press [ENTER].
Plug-in Auto Tuning starts and the unit puts the stations it
can receive into channels.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished. If the clock is an hour slower or
faster than the actual time, go to “Time Zone Adjust” to cor-
rect it (➜page 64).
3 When the display shows the correct time
Press [ENTER] to complete Plug-in
Auto Tuning.
If the unit couldn’t find any channels
Press [ENTER] to start Plug-in Auto Tuning again. If the channels
still aren’t tuned, set “Antenna System” manually and proceed to
“Auto Channel Setting” (➜page 13, “If Plug-in Auto Tuning fails”).
If unnecessary channels are set or necessary channels
are not set
Refer to page 13, “Adding and deleting channels”.
If the unit couldn’t set the clock automatically
Press [ENTER] to show the “Manual Clock Setting” screen. Set the
time manually (➜page 64).
To start Plug-in Auto Tuning again (after relocation, for
example)
When the unit is on and stopped
1 Press and hold [X, CH] and [W, CH] on the main unit for
about five seconds.
The unit turns off.
2 Press [Í, DVD POWER] to turn the unit on.
Press [ENTER] to start Plug-in Auto Tuning.
Band Air
VHF 2s13
UHF 14s69
Band Cable
VHF 2s13
CATV LOW BAND 95s99
CATV MID/SUPER BAND 14s36
CATV HYPER BAND 37s65
ULTRA BAND
66s94
100s125
SPECIAL CATV CHANNEL 1
DVD
VCR Plus+ TV/VIDEO
REC MODE
REC
CH
VOLUME
TV
TV
DVD
123
789
0
100
4
5
6
SLOW/SEARCH
DIRECT NAVIGATOR
TOP
MENU
MENU
RETURN
FUNCTIONS
PROG/CHECK
DISPLAY
TIME SLIP
ADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
ÍÍ
HDD
DVD
3, 4, 2, 1
ENTER
Í, DVD POWER
3, 4, 2, 1
ENTER
POWER Í/I
X W, CH
Antenna system, channel caption, and VCR Plusr guide
channel settings all revert to the default values when you
perform the procedure below. Timer recording settings are
also cleared.
RETURN
ENTER
Auto Channel/Clock Setting
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then. . .
Please push the ENTER key.