Filter
Top Products
Editing
41
RQT6570
The program is erased.
[Note]
≥ The disc’s available recording time may not increase after
erasing short programs.
≥ Computer data cannot be erased.
≥ The available recording time on DVD-R does not increase when
you erase programs.
Press [2] to set (or
cancel) protection
and press [ENTER].
≥ Use search and slow-motion to find the start and end points.
≥ Play pauses if the end of the program is reached during this procedure.
≥ You may not be able to specify points within 3 seconds of each other.
≥ You cannot specify an end point before a start point, or a start point after an end
point.
≥ You cannot specify points on still pictures in the program.
≥ The disc’s available recording time may not increase after erasing short segments.
Repeat to enter other sections.
Press [3, 4] to
select “Exit” and
press [ENTER].
Press [2] to
select “Erase”
and press
[ENTER].
Press [ENTER] at the
point you want to
divide the program.
To change the division point
➜ below
Press [3, 4] to select “Next” and press [ENTER], then press [2] to
select “Erase” and press [ENTER].
Press [2] to select
“Divide” and press
[ENTER].
0:19 Remaining Recording Time
Shorten Segment
Corresponding PLAY LIST will also be erased.
Erase Cancel
RETURN
ENTER
SELECT
Divide Program
Divide Cancel
RETURN
ENTER
SELECT
The program is divided.
[Note]
≥ Cancel Disc Protection (➜ page 38) or Cartridge Protection (➜ page 8) if
they are currently set. [RAM]
≥ The full title is shown in the Properties screen, but if you enter a long title,
only part of it is shown in the program list.
≥ If you enter a long title, only part of it is shown in the menu screen after
finalization. [DVD-R]
Once you divide the program,
it will not be restored to the original.
Press [2] to
select “Erase” and
press [ENTER].
Press [ENTER] at
the start point of
the section you
want to erase.
Press [ENTER] at
the end point of the
section you want to
erase.
Press [3, 4] to
select “Exit”
and press
[ENTER].
To confirm the division point
Press [3, 4] to select “Preview” and press [ENTER].
(Play will begin from a point 10 seconds prior to and
after the division point.)
To change the division point
Press [3, 4] to select “Divide” and press [ENTER]
at the point you want to change.
[Note]
≥ The divided programs retain the title of the original program. They also retain
the CPRM property (➜ page 8) of the original.
≥ A minute portion of the recording directly preceding the division point may be lost.
≥ It is not possible to carry out Divide Program in the following cases:
– when the program is extremely short.
– when the total number of programs is more than 250 (HDD) or 99 (DVD-RAM).
DIRECT NAVIGATOR
3
3
ENTER
0
~
9
No
TOTAL 3
SELECT
RETURN
DVD
No DATECH TIME EDITTITLE
9 : 00 PM
Auto action
02
6/20 WED
6
1
1
1
1
1
11 : 00 PM
USJ
03
6/20 WED
13
01
6/20 WED
4
10 : 00 AM
Dinosaur
The lock symbol
appears when the
program is write-
protected.
Shorten
Segment
0 : 00 . 01
Start
– : – – . – –
End
3
Start
End
Next
Exit
0 : 00 . 01
PLAY
03
RETURN
ENTER
SELECT
N
S
DVD
0 : 00 . 01
Start End
3
Start
End
Next
Exit
0 : 10 . 15
RETURN
ENTER
SELECT
0 : 10 . 15
03
3
Shorten
Segment
N
S
DVD