Filter
Top Products
Advanced operation
Changing the unit’s settings
62
RQT6570
See page 60 for menu and option details.
1 While stopped
Press [SET UP] to show the menus.
2 Press [3, 4] to select the menu’s tab
and press [1].
3 Press [3, 4] to select the menu and
press [ENTER].
4 Press [3, 4] to select the option and
press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Read the following
explanations.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
2. Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
3. Press [ENTER] to confirm the 4 digits.
[DVD-V]
Change the settings when you have connected equipment through
this unit’s DIGITAL AUDIO OUT terminal (➜page 57, [A]).
Select the “Audio” tab and then “Digital Audio Output” by
following “Common procedures” (➜ left) to set up “PCM Down
Conversion”, “Dolby Digital” and “DTS”.
Select how to output audio with a sampling frequency of 96 kHz.
Select “On” if the equipment you connect cannot process signals
with a sampling frequency of 96 kHz.
≥Select “Off” if you use analog connect irrespective of the type of
equipment.
Off (Factory preset):
Output as 96 kHz. There is no output if the disc has copy protection.
Select “On” in this case.
On:
Converted to 48 kHz for output.
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM:
Select if the equipment you connected cannot decode Dolby Digital
signal.
Off (Factory preset for DTS):
Select if the equipment you connected cannot decode DTS signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM or Off. If not, signals the
equipment cannot process will be output by this unit, causing
high levels of noise which can damage your hearing and the
speakers.
Common procedures
DVD
VCR Plus+ TV/VIDEO
REC MODE
REC
CH
VOLUME
TV
TV
DVD
123
789
0
100
4
5
6
SLOW/SEARCH
DIRECT NAVIGATOR
TOP
MENU
MENU
RETURN
FUNCTIONS
PROG/CHECK
DISPLAY
TIME SLIP
ADD/DLT
ENTER
PLAY LIST
CANCEL
POWER
ÍÍ
OPEN/CLOSE
SET UP
ERASE
DUBBING
POSITION MEMORY
MARKER
AUDIO
INPUT SELECT
CM SKIP
STATUS
SKIP
HDD
DVD
3, 4, 2, 1
ENTER
SET UP
RETURN
SET UP
CANCEL
Numbered
buttons
Tab
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plusi CH Setting
CATV
SET UP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
OptionsMenusTabs
Channel
Entering a password (Ratings)
If you insert a DVD-Video that exceeds the ratings limit you set, a
message appears on the television.
Follow the on-screen instructions.
Digital Audio Output
PCM Down Conversion
Dolby Digital and DTS
!?
!?