Filter
Top Products
Editing
39
RQT6570
RETURN
ENTER
SELECT
Prog # 7
Used Total Mark
Free
100 : 58
0 : 42 (SP)
Disc Protection
Enter Title
On
Format
Erase all programs
DISC SETTING
DVD
Formatting erases all contents on the disc,
including computer data or still pictures.
Check carefully before proceeding.
The lock symbol appears closed
when the disc is write-protected.
Press [2] to set (or cancel) disc
protection and press [ENTER].
All programs and play lists are erased.
[Note]
≥ Computer data or still pictures (JPEG) cannot be erased.
≥ The contents on the disc are erased even if you have set program protection.
[Note]
≥ Cancel Disc Protection (➜ page 38) or Cartridge Protection (➜ page 8) if they are currently
set. [RAM]
≥ If you enter a long title, only part of it is shown in the menu screen after finalization. [DVD-R]
Press [2] to
select “Start”
and press
[ENTER].
Press [3, 4, 2, 1] to select the
background and press [ENTER].
Finalizing starts.
Do not turn the unit off or disconnect the AC power supply cord while the message
“Finalizing the disc” is on the television. This will render the disc unusable. Finalizing
takes up to 15 minutes. A message appears when finalizing is finished. Press [ENTER] to
complete the procedure.
After finalizing...
The video and audio is recorded according to the DVD-Video specifications, and your very
own DVD-Video is created.
≥ Programs longer than 5 minutes are divided into about five-minute chapters.
≥ These DVD-R can be played on other Panasonic DVD players, but this is not guaranteed.
Play may not be possible due to the player you are using, the DVD-R, or the condition of the
recording. Play the disc using this unit if you experience problems with other equipment.
Visit Panasonic’s homepage for more information about DVDs.
http://www.panasonic.com/playDVD-R
Formatting starts.
Do not turn the unit off or disconnect the AC power supply cord while the message
“Formatting the disc” is on the television. This can render the disc unusable. A message
appears when formatting is finished. Press [ENTER] to complete the procedure.
[Note]
≥
Formatting takes up to a maximum of 70 minutes (DVD-RAM) or 1 minute (HDD).
≥
The contents on the disc are erased when you format it even if you have set program or disc
protection.
[RAM]
≥
The disc cannot be formatted if Cartridge Protection is activated
(➜ page 8)
.
[RAM]
≥
It may not be possible to use a disc on this unit if you cannot format it.
[RAM]
≥
Formatting cannot be performed on DVD-R or CD-R/RW.
To stop formatting [RAM]
Press [RETURN].
You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you
do this.
The DISC SETTING menu screen reappears.
Press [2] to
select “Yes”
and press
[ENTER].
Press [2] to
select “Start”
and press
[ENTER].
Press [2] to
select “Yes”
and press
[ENTER].
Press [2] to
select “Start”
and press
[ENTER].
Press [2] to
select “Yes”
and press
[ENTER].