Filter
Top Products
16
RQT6570
Setting up
STEP 5 Selecting TV screen type
Change the settings if you:
≥Connect the unit to a widescreen 16:9 aspect television.
➜Set “TV Aspect” to “16:9”.
≥Connect the unit through the COMPONENT VIDEO OUT
terminals (➜page 11) to a television compatible with progressive
video signals (480P).
➜Set “TV Type” to “480P”.
1 Press [SET UP] to show the menus.
2 Press [3, 4] to select “TV Screen”
and press [1].
3 Press [3, 4] to select “TV
Aspect” and press [ENTER].
4 Press [3, 4] to select “16:9” and
press [ENTER].
3 Press [3, 4] to select “TV
Type” and press [ENTER].
4 Press [3, 4] to select “480P” and
press [ENTER].
≥When playing back, select Video in the on-screen menu
and set “Transfer” according to the type of material being
played (➜page 52).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
∫ Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed
correctly. However, 4:3 video material (➜ below) will be stretched to
the right and left when displayed.
To view the picture at the right aspect
≥For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust
as necessary.
≥For televisions which do not allow the aspect of progressive
images to be adjusted, please turn OFF “Progressive”
(➜page 52).
4:3 video materials are usually found
≥In general television broadcasts (excluding some wide picture
broadcasts) and any pictures from discs that recorded such
programs.
≥In DVDs with an aspect ratio of 4:3 indicated on the jacket.
≥DVD-R or Video CD pictures