Filter
Top Products
VHS
Operations
19
RQTV0057
Search Functions
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS].
This unit can display a list of the recorded programmes on the
inserted video cassette on the TV screen. You can then select the
desired programme, and this unit will quickly reach its beginning and
start playback.
........................................................................................................................................................................................................................
[1] Press [NAVI].
≥When pressing [NAVI]
during playback, the
playback stops and the
Jet Navigator list appears.
.............................................................................................
[2] Press [NAVI] several
times to select the
programme.
After 3 seconds, the unit
starts to search for the beginning of the selected programme and
the playback will start automatically.
≥Every time you press [NAVI], the cursor shifts above.
¬ To cancel the Jet Navigator list
Press [MENU].
¬ To delete the Jet Navigator data of a video cassette tape
Press [CANCEL/RESET] for more than 5 seconds while the Jet
Navigator list appears.
“– –” appears on the list.
¬ To delete all the Jet Navigator data stored in the unit’s
memory (l 22)
¬ To demonstrate the Jet Navigator function
Press [NAVI] for more than 5 seconds without inserting a tape.
Notes:
≥The Jet Navigator programme list displays up to 14 programmes. If
you have already stored 14 programmes on a tape and then store
another one, the oldest item is replaced.
≥Signals approximately 10 seconds before and after the current tape
position are checked. During checking, “CHECKING JET
NAVIGATOR DATA.” is displayed on the TV screen.
≥Checking cannot be performed properly where there are no
signals, such as unrecorded portions of the tape. In this case, press
[NAVI] at a portion of the tape where a programme has been
recorded on this unit. When a signal can still not be found, the
message “CAN NOT FIND JET NAVIGATOR DATA.” appears on
the TV.
≥The Jet Navigator list is stored in each tape. Up to 20 tapes and 50
programmes can be registered.
≥“PROGRAMME IS COMPLETE. REMAINING PROGRAMME 0.
DELETE JET NAVIGATOR DATA.” appears when you try to store
more than 50 programmes. The new item is added and the oldest
item is deleted.
≥“REMAINING CASSETTE 0. FOR JET NAVIGATOR.” appears
when you try to store items for more than 20 tapes. Programmes
recorded without deleting data as instructed are not registered in
the list.
≥The list does not appear when playing tapes recorded on other
equipment.
≥When recording over the same location on a tape, it may not work
correctly.
Jet Navigator
To save Jet Navigator data
≥The tape length of the inserted cassette must be set correctly.
(l 22)
≥The unit must not be in the timer
recording standby mode.
≥A programme of at least 15
minutes must be recorded on the
tape.
1) Press [MENU] to display the
VHS MENU.
2) Press [34] to select
“OPTION” and then press
[ENTER].
3) Press [34] to select “JET NAVIGATOR” and then select
“ON” with [21].
4) Record programmes (l 15 – 18).
The unit makes the list as you record.
e.g. NV-VP33 GN
DATE
CH
ON
10
/
18
2 22:30
M
USIC
10
/
19
24 15:00
SPORT
10
/
21
5 22:15
10
/
23
A2 20:02
4 19:10
EDUCA
10
/
27
2 20:02
10
/
27
12 22:30
END
:MENU
SELECT : NAVI,
JET NAVIGATOR
CATEGORY
10
/
26
Time Stamp Function
When playback starts after
searching with Jet Navigator
function or index search function
(l 20), recorded programming
data (called Time Stamp) appears
on the TV screen for approx. 5
seconds.
Note:
≥Time Stamp does not appear if the beginning of the Jet
Navigator data is not recorded 10 minutes before and after the
current tape position even when index signals are recorded.
CH 2
10/29. SA
ON 20:02
VP33GL.book 19 ページ ２００５年４月２８日 木曜日 午後５時３４分