Filter
Top Products
8
RQTV0057
Connections
When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.
(NV-VP33GN only)
Basic Connections
The following connections are required to record the
video cassette and play back the video cassette/discs
through the TV.
≥Refer to the TV’s operating instructions.
≥Turn the TV off and disconnect its AC mains lead.
Note:
The included AC mains lead are for use with this unit
only. Do not use them with other equipment.
R-AUDIO-L
VIDEO
RF
AC IN
~
COAXIAL DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
R-AUDIO-L
VIDEO
S-
VIDEO
IN
OUT
COMPONENT VIDEO
(PROGRESSIVE/INTERLACE)
Y
P
B
P
R
R-AUDIO-L
VIDEO
VHS/DVD
OUT
AV1 IN
DVD
OUT
TV Set (Not supplied)
Aerial
(Not supplied)
Aerial Connector
To mains supply
R-AUDIO-L
VIDEO
AC IN
~
COAXIAL DIGITAL
AUDIO OUT
(PCM/BITSTREAM)
R-AUDIO-L
VIDEO
S-
VIDEO
COMPONENT VIDEO
(PROGRESSIVE/INTERLACE)
Y
P
B
P
R
R-AUDIO-L
VIDEO
VHS/DVD
OUT
AV1 IN
DVD
OUT
AUDIO
IN
LR
VIDEO
IN
S-VIDEO
IN
COMPONENT
VIDEO IN
Y
P
B
PR
R-AUDIO-L
VIDEO
S- VIDEO
VIDEO OUT
(480P/480I)
AUDIO IN
L
R
Television
Audio/Video Output Sockets
COMPONENT VIDEO terminal (progressive out)
These terminals can be used for either interlace or progressive
output and provide a clearer picture than the S VIDEO terminal.
Connection using these terminals outputs the colour difference
signals (P
B/PR) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colours.
≥The description of the component video input terminals depends
on the TV or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same colour.
Video cable (Not supplied)
Television
For Better Video from DVD
≥These connections are for the DVD section only.
Carry out the Basic Connections described above to view video from the
VHS section.
≥When making this connection, ensure that you connect the Audio cables
(not supplied) to the corresponding audio input terminals on the TV.
≥You may need to change the video-input mode on the TV to view video
from the VHS and DVD sections. Read your TV’s operating instructions
for details.
S-Video cable (Not supplied)
S VIDEO terminal
The S VIDEO terminal achieves a more vivid
picture than the VIDEO OUT terminal by
separating the chrominance (C) and luminance
(Y) signals (Actual results depend on the TV).
≥Connect to a different terminal group (e.g.
“VIDEO 2”) than that you used for the
connection through this unit’s VHS/DVD OUT
terminal. Picture from the VHS section will not
appear when you use the same group input
terminal connections because the S Video
terminal input takes precedence.
Television
≥Set the RF output channel of the unit to “ss”
(RF OFF) (l 11).
≥Connect Audio/Video cables directly to your TV.
The video signals on DVDs and video tapes
have copyright protection. The video may not be
shown correctly if you connect through an A/V
selector or other equipment.
Audio/Video cable
(Supplied)
Television
Audio cable
(Not supplied)
VP33GL.book 8 ページ ２００５年４月２８日 木曜日 午後５時３４分