Filter
Top Products
38
RQTV0057
Recording from DVD to VHS
You can record the contents of the disc onto a video cassette.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Insert a video cassette with an intact erasure prevention tab.
≥Press [VHS].
≥Select the desired recording mode (l 15).
Only discs not copy protected can be used.
≥Press [DVD].
≥Set “On-Screen Messages” to “Off” (SETUP menu l 37).
≥Insert the disc to be played (l 24). When you copy NTSC discs,
select “NTSC” in “NTSC Disc Output” (SETUP menul 37).
.........................................................................................................................................................................................................................
[1] Press [VHS], then press
[INPUT SELECT] repeatedly.
Select “dc” channel.
≥Recording is allowed only when the
VHS input channel is set to “dc” (l below).
.........................................................................................................................................................................................................................
[2] Press [DVD], then press [1PLAY].
Start playing the disc and find the playing start point.
.........................................................................................................................................................................................................................
[3] Press [;/D].
.........................................................................................................................................................................................................................
[4] Press [VHS], then press [1PLAY].
Start playing the video cassette and find the recording start
point.
.........................................................................................................................................................................................................................
[5] Press [;/D], then press [¥REC].
Put the unit in the recording standby mode.
.........................................................................................................................................................................................................................
[6] Press [;/D].
VHS recording and disc play start at the same time.
¬ To stop recording
1) Press [∫STOP]. Recording will stop.
2) Press [DVD], and press [∫STOP]. Disc play will stop.
Notes:
≥You can select the audio channel to be recorded on the Normal
audio track when dubbing a bilingual DVD (l 22).
≥If a copy protected disc is inserted, “COPYING OF THIS
MATERIAL IS NOT ALLOWED.” is displayed on the TV screen. If
you proceed with the recording, the video recorded will be
distorted.
You can copy programmes on a DVD-RAM disc to a video cassette
with One-touch operation.
≥This function allows DVD-RAM discs recorded by Panasonic DVD
recorders to be dubbed.
≥Insert the disc containing the programme to be copied (l 24).
≥This function allows you to record a whole content on a disc
automatically. Confirm that the remaining tape time is sufficient for
recording.
While stopped, press and hold [DVD-RAM
DUBBING] for 5 seconds or more.
When the disc is played all of a content or the tape reaches its end,
this unit automatically stops dubbing.
≥The message is displayed on TV screen for a few seconds when
DVD-RAM dubbing is completed.
¬ To stop recording
Press [∫STOP].
¬ When “ ” and “ ” is flashing
Check the settings again.
Notes:
≥In this function, the index signal is automatically added on the tape
for each of the programmes. You can find the desired programme
with these index signals (l 20).
≥This function does not work during timer recording standby mode.
≥When the dubbing starts, “On-Screen Messages” in the SETUP
menu is automatically set to “Off”. The “dc” channel is automatically
selected (l below).
≥If you press [DVD-RAM DUBBING] again, the dubbing starts at the
stop position memorized (Resume function l 24). “ ” in the
unit’s display flashes.
Manual Dubbing
DVD-RAM Dubbing
“dc” channel
≥When the disc is played with the “dc” channel set, the TV
screen displays the disc video.
VP33GL.book 38 ページ ２００５年４月２８日 木曜日 午後５時３４分