Filter
Top Products
22
Settings Using the On-Screen Display
RQTV0057
Set the Colour TV System.
........................................................................................................................................................................................................................
[1] Select “AUTO”
with [34].
≥The VHS automatically
distinguishes between
PAL or NTSC signals. If
the picture lacks of
colour during AV
external recording,
playback or recording
from DVD to VHS, set to
“PAL” or “NTSC”.
≥When you want to record or play back in black and white, set to
“B/W”.
........................................................................................................................................................................................................................
[2] Press [MENU] repeatedly until the setting
screen disappears.
Press [34] to select the item and press [21] to
change the setting.
¬ To exit the settings screen
Press [MENU] twice.
SYSTEM
OPTION
SYSTEM
AUTO
PAL
NTSC
B/W
SELECT :
END :
MENU
e.g. NV-VP33 GN
Items
Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the
correct remaining time (l 23).
AUTO
: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
AUTO
: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
on PAL TV
: TVs that can receive PAL signals
4.43: TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
JET NAVIGATOR (l 19)
ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA (l 19)
NO
ENTER: If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
OSD (l 23)
AUTO
: Messages appear on the TV for about 5 seconds
when you press [VHS STATUS].
OFF: Messages do not appear.
DUBBING NORMAL AUDIO (l 38)
Select the audio channel to be recorded on the Normal audio
track when dubbing a bilingual DVD.
L
: To record the sound from left channel
R: To record the sound from right channel
MONAURAL
Select the sound mode. (For NV-VP33GN only)
ON: To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF:
Normally set at this position.
VP33GL.book 22 ページ ２００５年４月２８日 木曜日 午後５時３４分