Filter
Top Products
To Enjoy Movies and Music More
DVD
Operations
33
RQTV0057
[DVD-V[
When you have connected equipment through this unit’s COAXIAL
DIGITAL AUDIO terminal (l 9), change the settings for “PCM Digital
Output”, “Dolby Digital”, “DTS Digital Surround” and “MPEG” (l 37).
You can enjoy the powerful movie theater and hall-like sound.
........................................................................................................................................................................................................................
[1] Press [SETUP].
..................................................................................................
[2] Press [34] to
select “Audio”.
..................................................................................................
[3] Press [ 1] (cursor)
then [34] to select
the item (l below),
and press [ENTER].
........................................................................................................................................................................................................................
[4] Press [34] to select the item and press
[ENTER].
........................................................................................................................................................................................................................
[5] Press [SETUP] to end the settings.
Check the digital input limitations of the equipment you connect using
COAXIAL terminal and select the maximum sampling frequency of
PCM digital output.
Up to 48 kHz (Initial setting): When connected to equipment
compatible with 44.1 kHz or 48 kHz
Up to 96 kHz: When connected to equipment
compatible with 88.2 kHz or 96 kHz
Notes:
≥Signals from copy-protected discs are converted to 48 kHz or 44.1
kHz.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment’s operating
instructions for details.
Bitstream (Initial setting for Dolby Digital and DTS Digital Surround):
Select if the equipment you connected can decode the signal.
PCM (Initial setting for MPEG):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
Select “Bitstream” when the equipment can decode the bitstream
(digital form of multi-channel data). Otherwise, select “PCM”.
Digital Output
PCM Digital Output
Dolby Digital, DTS Digital Surround and MPEG
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 and other U.S. and world-wide
patents issued and pending. “DTS” and “DTS 2.0+Digital
Out” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems, Inc. All
rights reserved.
DVD Setu
p
Disc
Video
Audio
Dis
p
la
y
Others
to select and
p
ress to exit
ENTER
RETURN
PCM Di
g
ital Out
p
ut U
p
to 48 kHz
DTS Digital Surround Bitstream
MPEG PCM
OffD
y
namic Ran
g
e Com
p
ression
Dolby Digital Bitstream
VP33GL.book 33 ページ ２００５年４月２８日 木曜日 午後５時３４分