Filter
Top Products
VHS
Operations
21
RQTV0057
Settings Using the On-Screen Display
Change the settings to suit your preferences and to suit the unit to
the environment in which it is being used. These settings are
retained in memory until they are changed, even if the unit is turned
off.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS].
........................................................................................................................................................................................................................
[1] Press [MENU].
................................................................................................
[2] Press [34] to
select the menu.
................................................................................................
[3] Press [ENTER].
¬ For CLOCK SET (l 12)
The unit tunes automatically when you plug it in and turn it on for the
first time (NV-VP33GN only, l 11), but you can start the process
again if necessary.
≥Select any programme position except “A1”, “A2” or “dc”.
Auto tuning searches for TV stations from VHF minimum to UHF
maximum and memorizes every tuned programme position. Other
programme positions are skipped (Channel plan l below).
........................................................................................................................................................................................................................
[1] Press [34] to
select “AUTO
TUNE”.
.............................................................................................
[2] Press [21] to
start Auto Tuning.
≥It may take up to 5
minutes or more to
complete.
≥When Auto Tuning is
completed, the on-
screen display
disappears and
programme position 1 is
selected.
¬ To stop halfway through
Press [MENU].
¬ If the unit is not correctly tuned by Auto Tuning
Follow the procedure on the right (Manual Tuning).
Channel plan
.......................................................................................................................................................................................................................
[1] Press [34] to select “CH” and select the
channel with [21].
.......................................................................................................................................................................................................................
[2] Press [34] to
select “CLEAR”
and select “OFF”
with [21].
ª
To select a blank
programme,
select “ON”. If you
select “ON”, proceed to
step 4.
≥To restore the channel
again, select “OFF”.
≥Repeat steps 1 and 2
for another unoccupied
programme positions to
skip during the selection
of the programme
positions.
.............................................................................................
[3] Select “SEARCH”
with [34] then
press [21] to
start the Manual Tuning.
≥If the desired TV station has not been tuned, press [21]
again.
≥Press [MENU] and repeat steps 1-3 for each programme
position you want to tune to a station.
≥You can also set the programme position directly by entering
the number with the numeric buttons (l below).
.......................................................................................................................................................................................................................
[4] Press [MENU] repeatedly until the setting
screen disappears.
.......................................................................................................................................................................................................................
[1] Press [34] to select “CH” and select the
channel with [21].
.......................................................................................................................................................................................................................
[2] Select “FINE” with [34] then press [21] to
obtain the best tuning condition.
≥Press [ENTER] to return the tuning to its former state.
.......................................................................................................................................................................................................................
[3] Press [MENU] until the setting screen
disappears.
Common procedures
TUNER PRESET
Auto Tuning
VHF UHF CATV
NV-VP33GL 0-12 28-69 45-470 MHz
NV-VP33GN 1-11 21-69 44-470 MHz
VHS
M
ENU
CLOCK
SET
TUNE
R
PRESET
SYSTEM
OPTION
T
APE
REFRESH
SELECT : , ENTER
END :
M
E
NU
The number of channels still to be auto
tuned.
TUNER PRESET
END : MENU
CH 1
CLEAR [OFF]
AUTO
T
UNE
SEARCH
[3]
FINE
CH 1
SEARCH
100
END : MENU
The number of channels still to be auto
tuned.
Manual Tuning
Direct Tuning
After you select “SEARCH”, press the numeric buttons to
select the programme position.
For the 5A and 9A channels, input the following numbers.
90 for CH-5A, 91 for CH-9A. (Example for NV-VP33GL)
≥For other channels that require tuning, repeat steps above.
Fine Tuning
CH
2
SEARCH
END :MENU
74
CH
2
SEARCH
END : MENU
TUNER PRESET
CH 2
CLEAR [OFF]
AUTO
T
UNE
SEARCH
[3]
FINE
CH
FINE
2
AFC : ENTER
END :MENU
VP33GL.book 21 ページ ２００５年４月２８日 木曜日 午後５時３４分