6
RQTV0057
Operations in these instructions are described mainly for the remote control, but you can do the operations on the main unit if the
controls are the same.
ªCommon section
[A] Power button (Í/I)
≥Press [Í/I] to switch this unit from on to standby mode or vice
versa. In standby mode, the unit is still connected to the main
AC power.
[B] Infra-red Remote Control Receiver Window
[C] Display
ªVHS section
(1) Tape Eject button (<EJECT) ...................................(l 13)
(2) Cassette Compartment
(3) AV2 IN (AUDIO/VIDEO) Sockets .............................. (l 16)
(4) Recording/One-Touch Recording button
(¥REC/OTR) ........................................................(l 15, 16)
(5) Timer Recording button ( TIMER REC) ..............(l 17)
≥Lights up while the unit is waiting for the timer recording or the
timer recording is being activated.
(6) Channel Down/Up buttons (IJCH).......... (l 10, 14, 15)
(7) ∫STOP button........................................................... (l 13)
(8) 1PLAY button .......................................................... (l 13)
(9) Rewind/Fast-Forward buttons
(6 56/REW FF/5) ......................................... (l 13)
ªDVD section
(1) Disc Tray
(2) Disc Tray Open/Close button (<
OPEN/CLOSE
)...... (l 24)
(3) DVD-RAM Dubbing button
(DVD-RAM DUBBING) .............................................. (l 38)
(4) ∫STOP button........................................................... (l 24)
(5) 1PLAY button .......................................................... (l 24)
(6) AV Enhancer button (AV ENHANCER)................... (l 26)
ªCommon section
[A] Counter Display
≥Current time/VHS recording and play counter/Disc play
counter/Miscellaneous messages, etc.
PL: Play list number
PG: Programme number
C: Contents number (HighMAT discs l 29)
G: Group number (Data Disc l 26)
[B] Running Indicator
≥Lights up when the VHS or DVD section is active.
≥Flashes when the cassette is paused or the disc is stopped.
≥Lights up one bar when the disc is paused.
≥Lights up and running one by one when the cassette or disc
is playing.
[C] Play Indicator
≥Lights up when playing cassette or disc.
ªVHS section
(1) Operation Status of VHS Section
≥Lights up when a cassette is inserted.
≥Flashes when recording or timer recording is
attempted with no cassette inserted.
(2) VHS Selector Indicator
≥Lights up when the VHS section is active.
(3) Timer Programme Recording Indicator
(4) Recording Indicator
≥Lights up during recording, dubbing or timer recording standby.
(5) Recording Mode Indicator (l 15)
ªDVD section
(1) Operation Status of DVD Section
≥Lights up when a disc is inserted.
(2) DVD Selector Indicator
≥Lights up when the DVD section is active.
Note:
≥“ ” or “ ” indicator lights up all the time if a cassette or CD is
inserted.
Main Unit
OPEN/CLOSE
(2)
(5)(4)
(2)
(1)
(3)
(1)
[A]
(9)
(6)
[B]
[C]
(6)(4)(5)(3)(7)(8)
The Unit’s Display
(2)
[A]
(2)
(4)
[B] [C]
(1)
(5)
(1) (3)
Control Reference Guide
VP33GL.book 6 ページ 2005年4月28日 木曜日 午後5時34分