Filter
Top Products
VQT9473
32
ENGLISH
1
2
1
1
2
2
A
B
B
Panasonic
3
4
33
If the DVD-RAM/R drive is installed vertically
DVD-RAM discs
Tray
Label
DVD-RAM disc
1 Insert so the label-side of the shutter is
facing up.
2 Push the DVD-RAM disc about 2 cm to-
wards the DVD-RAM/R drive.
3 Press gently on the shutter-label so the
DVD-RAM disc sits firmly on the tray.
DVD-R and other 12 cm discs
Stopper
Disc holder A
Disc holder B
Tray
Label
DVD-R, CD, CD-ROM or DVD-ROM disc
You cannot use 8-cm discs if the DVD-RAM/R
drive is set up vertically, even if you use an
adapter.
1 Fold out the stopper.
2 Raise disc holders A and B so they are
higher than the tray.
3 Insert the disc diagonally between the
stopper and the tray and push it about
1 cm towards the stopper.
4 Now pull the disc back so it fits between
the tray and disc holders A and B.
Note:
•
Do not turn off the computer or remove DVD-RAM discs while the Operation Indicator lamp is
orange. This can destroy data or cause data to be written incorrectly.
•
To avoid damage to your discs and this DVD-RAM/R drive, do not insert more than one disc on a tray.