Filter
Top Products
VQT9473
40
Driver software installation
Windows 98 / Windows Me
1
Insert the supplied CD-ROM (VFF0128 or VFF0129) into the DVD-RAM/R
drive.
The installation program starts automatically.
•
If the installation program does not start automatically, start it manually by following the proce-
dure below.
(This assumes that the drive letter assigned to the DVD-RAM/R drive for CD-ROM media is E:.)
From the Start menu select [Run].
In the “Open” box, enter “e:\setup.exe”.
Click [OK].
The installation program starts.
2 Click [Installation software for
DVD-RAM/R drive].
• For installation of application soft-
ware, refer to pages 98, 104, or 112.
3
When the dialog at right is displayed,
select “Driver Soft (Mandatory)”.
•
Select the applications you want to install.
•
The Q&A file is installed if you click on “Q&A”
(refer to page 124).
Click on [Install].
Installation begins.
•
Follow the on-screen instructions to proceed.
4
After installation,
Select “Yes, I want to restart my com-
puter now”.
Click [Finish].
The computer now reboots.
•
You can use the DVD-RAM/R drive after
rebooting.
•
To verify that the drivers were installed correctly,
refer to “Checks after installation” on pages 46
and 48.
ENGLISH
(A) in case of VFF0128 (B) in case of VFF0129
(Continued on the next page)