Filter
Top Products
[PROJECTOR SETUP] menu
112 - ENGLISH
Settings
[LENS MEMORY]
Save and call the focus position, shift position and
zoom position of an adjusted lens.
1) Press
to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press
to select an item.
■
Saving lens position
4) Select [LENS MEMORY SAVE] in Step
3).
5) Press the <ENTER> button.
z
The [LENS MEMORY SAVE] screen is
displayed.
6) Press
to select the item to
initialize, and press the <ENTER>
button.
7) When the conrmation is displayed,
select [OK], and press the <ENTER>
button.
z
Lens memory input screens are displayed.
8) Press
to select the text, and
press the <ENTER> button to enter the
text.
9) After the name is input, press
to select [OK], and press the <ENTER>
button.
z
The registration completes and returns to the
[LENS MEMORY SAVE] screen.
z
If you press
to select [CANCEL]
and then press the <ENTER> button, the lens
memory will not be saved.
z
If you press
to select [DEFAULT] and
press the <ENTER> button, the entered name
will not be registered and the default name will
be used.
z
If you select [OK] without entering any
characters and press the <ENTER> button, the
default name will be used.
■
To call the lens position
4) Select [LENS MEMORY LOAD] in Step
3).
5) Press the <ENTER> button.
z
The [LENS MEMORY LOAD] screen is
displayed.
6) Press
to select the item to
initialize, and press the <ENTER>
button.
7) When the conrmation is displayed,
select [OK], and press the <ENTER>
button.
z
Moves automatically to the registered shift,
zoon and focus positions.
Note
z
Lens memory is not guaranteed to be 100%
reproduced.
z
The zoom and focus positions may have shifted
after lens memory was called. Readjust as
necessary.
Beware of shift, as errors in zoom position are
particularly signicant.
z
When a lens is replaced, readjust and save the lens
memory again.
z
If a lens without zoom function is used, the lens
memory of the zoom position does not operate.
z
When using the <FUNC> button to assign a [LENS
MEMORY LOAD], the lens memory is called in
order each time you press the <FUNC> button.
■
To delete a lens memory
4) Select [LENS MEMORY EDIT] in Step
3).
5) Press the <ENTER> button.
z
The [LENS MEMORY EDIT] screen is
displayed.
6) Press
to select [LENS MEMORY
DELETE].
7) Press the <ENTER> button.
z
The [LENS MEMORY DELETE] screen is
displayed.
8) Press
to select the item to delete,
and press the <ENTER> button.
9) When the conrmation is displayed,
select [OK], and press the <ENTER>
button.