Filter
Top Products
Setting up
42 - ENGLISH
Getting Started
Adjusting adjustable feet
Install the projector on a at surface so that the front of the projector is parallel to the screen surface and the
projection screen is rectangular.
If the screen is tilted downward, the projection screen can be adjusted to be rectangular by adjusting the
adjustable feet. The adjustable feet can also be used to adjust the projector to be level when it is tilted in a
horizontal direction.
Extend the adjustable feet by rotating in the direction shown in the gure and retract by rotating in the opposite
direction.
Adjustable range
Front adjustable feet: 12 mm (15/32")
Rear adjustable feet: 12 mm (15/32")
Attention
z
Hot air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the
adjustable feet. (
page 24)