Panasonic PT-DZ21KE Home Theater Screen User Manual


 
[DISPLAY OPTION] menu
ENGLISH - 91
Settings
[AUTO SETUP]
You can set when adjusting a special signal or
horizontally long (16:9, etc.) signal.
1) Press

to select [AUTO SETUP].
2) Press the <ENTER> button.
z
The [AUTO SETUP] screen is displayed.
3) Press

to select an item.
To set [MODE]
4) Select [MODE] in Step 3).
5) Press
󱚣󱚤
to switch [MODE].
z
The setting will change as follows each time
you press the button.
[DEFAULT] [WIDE] [USER]
[DEFAULT] Standard setting.
[WIDE]
Select when an image aspect is a
wide-screen signal, which does not
meet the [DEFAULT] settings.
[USER]
Select when displaying a signal
with a special horizontal resolution
(number of display dots).
z
If [DEFAULT] or [WIDE] was selected in
Step 5)
6) Press the <ENTER> button.
z
Automatic adjustment is executed.
[PROGRESS] is displayed while automatically
adjusting. When complete, the system returns
to the [AUTO SETUP] screen.
z
If [USER] was selected in Step 5)
6) Press

to select [DISPLAY DOTS],
and press
󱚣󱚤
to adjust [DISPLAY
DOTS] to the horizontal resolution of
the signal source.
7) Press

to select [MODE].
8) Press the <ENTER> button.
z
Automatic adjustment is executed.
[PROGRESS] is displayed while automatically
adjusting. When complete, the system returns
to the [AUTO SETUP] screen.
To adjust position automatically
4) Select [POSITION ADJUST] in Step 3).
5) Press
󱚣󱚤
to switch [POSITION
ADJUST].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Does not perform automatic
adjustment.
[ON]
Adjust the screen position and size
when auto setup is executed.
To adjust signal level
automatically
4) Select [SIGNAL LEVEL ADJUST] in
Step 3).
5) Press
󱚣󱚤
to switch [SIGNAL LEVEL
ADJUST].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Does not perform automatic
adjustment.
[ON]
Adjust black level (on-screen menu
[BRIGHTNESS]) and white level (on-
screen menu [CONTRAST]) when
auto setup is executed.
Note
z
[SIGNAL LEVEL ADJUST] may not function
properly unless a still image containing clear blacks
and whites is input.