Filter
Top Products
Setting up
28 - ENGLISH
Getting Started
Setting up
Projection method
You can use the projector with any of the following four projection methods. Select the appropriate method
depending on the environment.
■
Mounting on the ceiling and
projecting forward
■
Setting on a desk/oor and
projecting from rear
(Using the translucent screen)
Menu item
*1
Method
[PROJECTION
METHOD]
[FRONT/CEILING]
[COOLING
CONDITION]
[CEILING SETTING]
Menu item
*1
Method
[PROJECTION
METHOD]
[REAR/FLOOR]
[COOLING
CONDITION]
[FLOOR SETTING]
■
Mounting on the ceiling and
projecting from rear
(Using the translucent screen)
■
Setting on a desk/oor and
projecting forward
Menu item
*1
Method
[PROJECTION
METHOD]
[REAR/CEILING]
[COOLING
CONDITION]
[CEILING SETTING]
Menu item
*1
Method
[PROJECTION
METHOD]
[FRONT/FLOOR]
[COOLING
CONDITION]
[FLOOR SETTING]
*1: For menu item details, see the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (
page 99) and [COOLING
CONDITION] (
page 100).
Parts for ceiling mount (optional)
You can install the projector on the ceiling using the optional ceiling mount bracket (Model No.: ET-PKD510H (for
high ceilings), or ET-PKD510S (for low ceilings).
z
Use only the ceiling mount brackets specied for this projector.
z
Refer to the installation manual for the ceiling mount bracket when installing the bracket and the projector.
Attention
z
To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by
your dealer or a qualied technician.