Panasonic PT-DZ21KE Home Theater Screen User Manual


 
[ADVANCED MENU]
80 - ENGLISH
Settings
[FRAME RESPONSE]
Image processing is simplied when 1080/60i,
1080/50i, and 1080/24sF signals are input to reduce
image frame delay.
1) Press

to select [FRAME
RESPONSE].
2) Press
󱚣󱚤
to switch [FRAME
RESPONSE].
z
The setting will change as follows each time
you press the button.
[NORMAL] [FAST]
[NORMAL] Standard setting.
[FAST]
Set when the picture is displayed
later than sound.
Note
z
When [FRAME RESPONSE] is set to [FAST],
picture quality deteriorates. Noise reduction, digital
cinema quality and P IN P functions also cannot be
used.
z
When [NOISE REDUCTION] is set to other than
[OFF], [FRAME RESPONSE] cannot be set.
[FRAME LOCK]
(PT-DZ21KE and
PT-DS20KE only)
Set this to view 3D display when the scanning
frequency of the signal is 25 Hz, 50 Hz, and 100 Hz.
1) Press

to select [FRAME LOCK].
2) Press
󱚣󱚤
to switch [FRAME LOCK].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF] Decreases the ickering.
[ON]
Synchronizes the display to the
scanning frequency of the input
signal.
Note
z
[FRAME LOCK] is not displayed when the scanning
frequency of the signal other than above is input or
2D images are displayed.
z
The screen may icker when the [FRAME LOCK] is
set to [ON].
z
The display may look discontinuous when the
[FRAME LOCK] is set to [OFF].
[RASTER POSITION]
This will allow the position of the image to move within
the display area arbitrarily when the input image is not
using the whole display area.
1) Press

to select [RASTER
POSITION].
2) Press the <ENTER> button.
z
The [RASTER POSITION] screen is displayed.
3) Press
󱚣󱚤
to adjust the position.