Panasonic PT-DZ21KE Home Theater Screen User Manual


 
Attaching/removing the projection lens (optional accessory)
ENGLISH - 43
Getting Started
Attaching/removing the projection lens (optional accessory)
Attaching the projection lens
1) Remove the projection lens cover.
z
While grasp the right and left buttons from
vertical and horizontal directions, pull the lens
cover to remove.
2) Insert by aligning the projection lens
(orange) mark with the mark on the
projector body (a circle to the left
of LOCK) and turn clockwise until it
clicks.
3) Secure the projection lens with the
lens xing screw supplied
*1
.
z
Use a Phillips screwdriver to secure it in the
rst screw hole to the right of the projection lens
(orange) mark.
*1: Some lenses may not have a screw hole to use to secure
the projection lens.
4) Attach the projection lens cover.
Attention
z
Turn the projection lens counterclockwise to conrm
that it does not come out.
z
Store the removed dust sponge in a safe place to
transport or store.
Removing the projection lens
1) Remove the projection lens cover.
z
While grasp the right and left buttons from
vertical and horizontal directions, pull the lens
cover to remove.
2) Remove the lens xing screw
*1
.
z
Use a Phillips screwdriver to remove the rst
screw to the right of the projection lens (orange)
mark.
*1: Some lenses may not have a screw hole to use to secure
the projection lens.
3) While pressing the lock button, turn
the projection lens counterclockwise
to remove.
z
Turn counterclockwise until the projection lens
(orange) mark is at the mark on the projector
body (the circle to the left of LOCK).
/RFNEXWWRQ
4) Attach the projection lens cover and
dust sponge.
Attention
z
Store the removed lens where it will be free from
vibration and impact.
z
Store the removed lens xing screw in a safe place.
Move the lens to the home position before replacing or removing the lens. (
page 53)
Attention
z
Replace the projection lens after turning off the power of the projector.
z
Do not touch the lens signal receiver. Dust or dirt may cause defective contact.
z
Do not touch the lens surface with your bare hands.
z
Before attaching the projection lens, remove the lens cover attached to the projection lens.