Operation and Maintenance
5-18
9123-A2-GB20-00
May 2000
Table 5-8. Test Status Messages (2 of 2)
Message What It Indicates
Send
Pttn
Active, DLCI
nnnn
,
frame_relay_link
1,2
The unit is monitoring the selected test pattern on
the specified DLCI for the interface.
Send
Pttn
Active,
[Interface]
A Send Pattern test is active on the specified
interface.
This test cannot be activated on user data ports
that have Port Use set to Frame Relay.
1
nnnn
indicates a DLCI number of 16 through 1007.
2
frame relay link
is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-1. The frame relay link associated with the user data port.
Network LMI-Reported DLCIs Status
Network LMI-reported DLCI statuses are selected from the Status menu.
Main Menu
→
Status
→
LMI Reported DLCIs
The LMI Reported DLCIs screen displays the status and CIR (if supported by the
switch) for each DLCI, whether the DLCI is configured or not.
This screen only appears when Service Type is set to Frame Relay.
LMI-Reported DLCIs Status Screen Example
main/status/lmi_dlcis 9123-C-SLV
Device Name: Node A 3/26/2000 23:32
frame relay link
LMI REPORTED DLCIs Page 1 of 2
DLCI STATUS CIR (bps) DLCI STATUS CIR (bps)
* 300 Active 16000 * 622 Active 32000
* 305 Inactive * 624 Active 32000
* 400 Deleted * 625 Deleted
* 410 Inactive * 713 Active 32000
411 Inactive * 822 Active 32000
420 Inactive 32000 * 1002 Active 32000
430 Active
501 Inactive
511 Active 256000
520 Active 64000
* – DLCI is configured on the Frame Relay Link.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu M
ainMenu Exit
R
efresh PgUp PgDn NextLink PrevLink
An asterisk (*) next to the DLCI indicates that the DLCI has been configured for
the link.