Configuration
3-8
9123-A2-GB20-00
May 2000
Using the Easy Install Feature
The Easy Install feature allows the FrameSaver unit to be installed like a standard
leased-line SNMP DSU/CSU. Once the unit is installed and minimal configuration
is completed using this feature, the NOC (Network Operation Center) can
complete configuration of the unit and verify the setup.
Main Menu
→
Easy Install
Easy Install Screen Example
main/easy_install 9123-C-SLV
Device Name: Node A 3/26/2000 23:32
EASY INSTALL
Service Type: Frame Relay
Node IP Address: 000.000.000.000 Clear
Node Subnet Mask: 000.000.000.000
Clear
TS Access: DLCI
980
Create a Dedicated Network Management Link
Ethernet Port Options Screen
Time Slot Assignment Screen
Network 1 Line Framing Format: ESF
Network 1 Line Build Out (LBO): 0.0
Network 1 Line Coding Format: B8ZS
DS0 Base Rate (Kbps): Nx64
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
To access the unit:
H
For non-managed networks
, use the TS Access DLCI to ping the unit five
times within five seconds.
H
For managed networks
, use the Dedicated Network Management Link that
was created.
The menu structure and selections, and the features and functions of the
FrameSaver unit, are changed based upon the type of service being used.