About the FrameSaver FLEX 9123
1-3
9123-A2-GB20-00
May 2000
To obtain an activation certificate, provide the model to be upgraded (i.e., 9123),
your OpenLane system license key number, and the number of FrameSaver units
to be upgraded to FLEX SLV capability. When you receive your certificate, it will
include a FLEX Activation Certificate number, the Feature Group Number for the
additional SLV features (Feature Group 2), your OpenLane license key number,
and the number of device activations (license keys) ordered.
When ready to activate FLEX SLV capability in the unit(s), run the OpenLane
SLM application. It will prompt you for the serial numbers of the units to be
activated, their IP addresses, and whether the activations will be immediate or
scheduled. OpenLane then activates SLV capability in the designated units and
the units are reset. A report summary will be available that provides information
about the activation certificate, the activated units, and the number of license
keys remaining.
The following table summarizes the features that are included in the two feature
sets. See
Basic FLEX Features
and
Advanced FLEX SLV Features
for additional
information.
Feature Set
Feature
Basic
FLEX
Advanced
FLEX SLV
Physical and frame relay performance statistics Yes Yes
SLV performance statistics
(e.g., FDR/DDR, latency, CIR/EIR relationships)
No Yes
Trap Log Yes Yes
Multiplexed user data DLCIs No Yes
Troubleshooting DLCI for remote management Yes Yes
Layer 2 (data link) diagnostics
(nondisruptive DLCI loopbacks)
Yes Yes
PVC Burst Table Yes Yes
User history available via SNMP RMON2 polling Yes Yes
User history available via FTP No Yes
RMON alarms and proactive alarm thresholds No Yes
OpenLane SLM system real time applications Limited
(no SLM)
Yes
OpenLane SLM system historical reports and graphs No Yes
Layer 3 (network) Top Talkers No No
NetScout Manager Plus support Limited
(alarms and
history only)
Limited
(alarms and
history only)