Filter
Top Products
Operation and Maintenance
5-36
9123-A2-GB20-00
May 2000
ESF Line Performance Statistics Screen Example
main/status/performance/esf 9123-C-SLV
Device Name: Node A 3/26/2000 23:32
Network 1 ESF LINE PERFORMANCE STATISTICS
Current Interval Timer ESF Error Events
Near=123 Far = 124 Near = 15 Far = 12
–––ES–– ––UAS–– ––SES–– ––BES–– ––CSS–– –LOFC––
Time Near Far Near Far Near Far Near Far Near Far Near Far
Current: 10:37 0 0 0 0 0 0 0 0 0 0 0 0
Int 01
: 10:35 0 0 0 0 0 0 0 0 0 0 0 0
Int 02: 10:20 0 0 0 0 0 0 0 0 0 0 0 0
Int 03: 10:05 0 0 0 0 0 0 0 0 0 0 0 0
Int 04
: 09:50 0 0 0 0 0 0 0 0 0 0 0 0
Int 05: 09:35 0 0 0 0 0 0 0 0 0 0 0 0
Int 06: 09:20 0 0 0 0 0 0 0 0 0 0 0 0
Int 07
: 09:05 0 0 0 0 0 0 0 0 0 0 0 0
Worst Interval: 24 24 14 14 14 14 09 09 18 16 44 44
Near Tot(valid 96): 00010 00000 00000 00000 002 003
Far Tot(valid 96): 00010 00000 00000 00000 002 003
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
R
efresh PgDn PgUp ClrFarStats ClrNearStats
Select: 01, 02, 03, 04, 05, 06, 07, 08, 09 ...
Line 10
Line 13
Line 16
Line 18
For the ESF line performance statistics, the following performance statistics are
kept for each 15-minute interval over the past 24-hour period. A Near set and a
Far set are kept for each statistic. The Far set is based on information kept by the
unit at the other end of the local loop and is only available when ANSI
performance report messages are enabled in the unit.
Summary information that appears near the top of the screen includes:
H Near/Far Current Interval Timer – Contains the number of seconds that
have elapsed in the current 15-minute interval for the near or far information,
which can show a value up to 900 seconds.
H Near/Far ESF Error Events – Maintains a count of ESF error events, as
specified by AT&T TR 54016, which counts CRC and OOF events. A
maximum of 65,535 error events can be counted. Once 65535 is reached,
it stays at that number until the network issues a reset command.