Filter
Top Products
Operation and Maintenance
5-19
9123-A2-GB20-00
May 2000
DLCIs without an asterisk have not been configured in the unit. These DLCIs
pass through the unit transparently, without being monitored and with no
demultiplexing/multiplexing of management diagnostics or user data being
performed. Only DLCIs on the Net1-FR1 and Port-1 frame relay links appear on
this screen; nonconfigured DLCIs on other links are discarded.
Table 5-9. Network LMI-Reported DLCIs Status
Field
Status What It Indicates
DLCI 16 through 1007 Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface – the
identifying number assigned to the path
between two frame relay FrameSaver
units’ ports.
DLCI statuses are listed in ascending
order (i.e., lowest number first).
Status
Active
LMI-reported status of the DLCI:
H Whether the DLCI is active (capable
of carrying data) in the frame relay
network,
Inactive H Whether it is inactive in the frame
relay network,
Deleted
1
H Whether it has been deleted by the
frame relay network, or
New
1
H Whether it has been created by the
frame relay network.
CIR (bps) 0–1536000 Displays the committed information rate
reported by the Stratacom switch. CIR
information only appears in this column
when LMI Protocol is set to Standard.
If blank, the switch does not support this
feature.
1
Appears for 10 seconds only, before the network changes Deleted to Inactive
and New to Active.