Filter
Top Products
C2631M-A (6/07) Client Application 65
CONFIGURING PRESET TOURS
A preset tour allows a camera to move through a programmed sequence of PTZ presets. The DX8100 Series DVR can store up to four preset
tours. While four tours can be programmed, only one tour can be activated at a time. A preset tour will operate continuously until another PTZ
control action is performed. At least one PTZ preset must be set in order to create a preset tour.
This section describes how to configure preset tours and includes the following topics:
• Programming a Preset Tour
• Activating a Preset Tour
• Deactivating a Preset Tour
PROGRAMMING A PRESET TOUR
This section describes how to program a preset tour and includes the following topics:
• Accessing a Preset Tour Group
• Adding Presets to a Tour
• Deleting Presets from a Tour
Accessing a Preset Tour Group
To access the “Preset tour group” dialog box:
1. On the DX8100 toolbar, click .
2. On the DX8100 keypad, click and then on the PTZ keypad. The “Preset tour group” dialog box opens.
3. Select the preset tour (1-4) that you want to program from the drop-down box.
4. Do one of the following:
• To add presets to a tour, refer to Adding Presets to a Tour.
• To delete presets from a tour, refer to Deleting Presets from a Tour.
Figure 46. Preset Tour Dialog Box
ᕣ