Pelco DX7000 DVR User Manual


 
18 C665M-C (5/03)
1
3
2
MOTION SPEED MENU
Figure 6. Motion Speed Menu
1 MOTION Button– Select the MOTION button to open the motion speed menu. Use this menu to set motion detection and
pre-alarm recording speeds.
2 Motion Recording Speed Slider Bar –Use the slider bar to set the recording rate for motion detection. If the camera is
already set to record continuously, the recording rate for motion can be set to record at a higher speed. The total
available fps for all cameras varies per system mode setup (simplex, duplex, or backup).
3 Pre-Alarm Function Slider Bar: You can program the pre-alarm function for motion recording. When motion is detected,
images are recorded for the programmed duration (five seconds maximum per camera) before an event happens.