Filter
Top Products
44 C665M-C (5/03)
PRESETS
A preset is a user-defined camera position using pan and tilt, zoom, and focus commands. The DX7000 Series DVR has
programming capacity for 12 preset locations.
NOTE: The selected camera is indicated by the number displayed in the center of the PTZ controls. Refer to Figure 22.
HOW TO MOVE TO A PRESET
a. Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.
b. Click PRESET.
c. Click the MOVE button.
d. Click a preset button 1-12. The camera moves to the programmed preset position.
NOTE: The remote site software can run only presets and preset tours. Presets can be programmed only with the DX7000 DVR.