Filter
Top Products
42 C665M-C (5/03)
Figure 22. PTZ Controls
DOWN
CAMERA
RIGHT
UP
LEFT
00949
REMOTE SOFTWARE PTZ CONTROL MODE
To operate pan/tilt/zoom functions on controllable systems, do the following:
a. Select a camera.
• Move the cursor to a camera screen view and double-click the left mouse button.
•A single camera view appears on the screen and the camera number (1 through 16) appears in the center of the pan
and tilt control (refer to Figure 21).
b. Use the buttons to pan left and right.
c. Use the buttons to tilt up and down.
d. If required use the FOCUS settings (+/-) to obtain the clearest picture.
e. Use the ZOOM settings (+/-) to zoom near/far.
▼
▲
▼
▲