Pelco DX7000 DVR User Manual


 
C665M-C (5/03) 19
1
32
SENSOR SPEED MENU
Figure 7. Sensor Speed Menu
1 SENSOR Button – Select the SENSOR button to open sensor speed menu. Use this menu to set the sensor detection and
pre-alarm recording speeds.
2 Sensor Recording Speed Slider Bar - Use the slider bar to set the recording rate for sensor detection. If the camera is
already set to record continuously, the sensor recording rate can be set to record at a higher speed. The total available
fps for all cameras varies per system mode setup (simplex, duplex, or backup).
3 Sensor Pre-Alarm Function Slider Bar - You can program the pre-alarm function for sensor recording. When an alarm is
triggered, images are recorded for the programmed duration (5 seconds maximum per camera) before the event
happened.