Filter
Top Products
C2629M-A (6/07) 87
9. In the Device Configuration page, do the following:
a. Click the Settings tab. The Available ATM/POS Device table is displayed.
b. In the Device ID column, click the check box to select an ATM/POS device.
c. Double-click the Data Format cell for the selected ATM/POS device. The Data Format cell drop-down box is displayed.
d. Click in the Data Format cell to display the available data formats.
e. Select the data format you want to assign to the ATM/POS device.
f. Do one of the following:
• Click Apply to confirm selection and remain in the Device Configuration dialog box.
• Click OK to confirm selection and return to the Port/Device page.
Figure 113. Assigning a Data Format to An ATM/POS Device
10. Click . The Linking setup page is displayed.